ReVamp Fence & Deck

ReVamp Fence & Deck

Overview

Serves Freeport, IL

Business hours

SunClosedMon8:00 am - 6:00 pmTue8:00 am - 6:00 pmWed8:00 am - 6:00 pmThu8:00 am - 6:00 pmFri8:00 am - 6:00 pmSat9:00 am - 2:00 pm

Payment methods

This pro accepts payments via Cash, Check, Credit card, and Debit card.

Services offered
Contact

+18442099843

29 E Stephenson St, Freeport, IL 61032

Reviews
4.0

106 reviews

5

4

3

2

1

Jordan Fischer

Jul 15, 2024

•From Google
This is for the Little Chute / Appleton, WI location. The sales process was actually pretty smooth, involving dialogue around the quality of materials and installation process, which resulted in our decision to move forward with them, though they were the highest cost alternative by far. Discussion of the build plans showed the typical 8’ wide panels being centered on each fence run length, with the remaining panels at each corner being cut to the same length for symmetry (similar to how you would lay out tile for a backsplash/floor). After the first day of work was complete (~3 hours on-site), I noticed that they started at one end of the back run with 8’ sections and stopped at the other end with (3) 5’ sections, doing similar on the other runs (back to the tile example, imagine having all full-width tiles across your backsplash and then a few at the end cut down to smaller widths). I contacted the sales person and they got me in contact with the field operations manager so we discussed the problems and they agreed to fix them. After the installers finished working on the second day, I got home to see that on the back run they kept (4) 8’ sections, put in a 7’ section, and then cut the rest of the (10) remaining sections down to less than 7.5’. The free side of the 10’ gate was also oddly mismatched to the rest of the gate and dragged on the ground when opened, in addition to having handles that were not height-matched where the other half of the 10’ gate and the 4’ gate were height-matched. I contacted them again to express my concern over not following the plan and the gate, and they asked to come on-site to audit the work. I met with them this morning (6/14/24) to discuss and their solution is to come back and tear nearly everything out for the second time to do it right, with no discount for the inconvenience. While it is not an expectation for someone to discount doing work correctly, inconvenience of continued re-work and trampling my newly planted grass (new-build house) would typically warrant some form of compromise. My wife talked with the owner and he said they do not center the 8’ panels on each run and that the drawing received for getting a permit is generic, although I’m having trouble wrapping my head around why the panel lengths are even included since the permit has nothing to do with that level of detail. To give credit, he is still agreeing to fix it to our agreed-upon layout, noting the aforementioned lack of financial concession for the headaches. If you are a detail-oriented person who would like their fence runs symmetrical, instead of at the discretion of how the install team thinks is easiest, do not pay this company’s exorbitant cost. The materials do seem to be good quality, but what is the benefit of good quality materials if the end result looks like there was no care or thought to the installation? Merriam-Webster defines “revamp” as follows: remake, revise. I sure have a couple remakes under my belt in dealing with this company on a single project.

Jordan Fischer

Jul 8, 2024

•From Google
This is for the Little Chute / Appleton, WI location. The sales process was actually pretty smooth, involving dialogue around the quality of materials and installation process, which resulted in our decision to move forward with them, though they were the highest cost alternative by far. Discussion of the build plans showed the typical 8’ wide panels being centered on each fence run length, with the remaining panels at each corner being cut to the same length for symmetry (similar to how you would lay out tile for a backsplash/floor). After the first day of work was complete (~3 hours on-site), I noticed that they started at one end of the back run with 8’ sections and stopped at the other end with (3) 5’ sections, doing similar on the other runs (back to the tile example, imagine having all full-width tiles across your backsplash and then a few at the end cut down to smaller widths). I contacted the sales person and they got me in contact with the field operations manager so we discussed the problems and they agreed to fix them. After the installers finished working on the second day, I got home to see that on the back run they kept (4) 8’ sections, put in a 7’ section, and then cut the rest of the (10) remaining sections down to less than 7.5’. The free side of the 10’ gate was also oddly mismatched to the rest of the gate and dragged on the ground when opened, in addition to having handles that were not height-matched where the other half of the 10’ gate and the 4’ gate were height-matched. I contacted them again to express my concern over not following the plan and the gate, and they asked to come on-site to audit the work. I met with them this morning (6/14/24) to discuss and their solution is to come back and tear nearly everything out for the second time to do it right, with no discount for the inconvenience. While it is not an expectation for someone to discount doing work correctly, inconvenience of continued re-work and trampling my newly planted grass (new-build house) would typically warrant some form of compromise. My wife talked with the owner and he said they do not center the 8’ panels on each run and that the drawing received for getting a permit is generic, although I’m having trouble wrapping my head around why the panel lengths are even included since the permit has nothing to do with that level of detail. To give credit, he is still agreeing to fix it to our agreed-upon layout, noting the aforementioned lack of fi1cial concession for the headaches. If you are a detail-oriented person who would like their fence runs symmetrical, instead of at the discretion of how the install team thinks is easiest, do not pay this company’s exorbitant cost. The materials do seem to be good quality, but what is the benefit of good quality materials if the end result looks like there was no care or thought to the installation? Merriam-Webster defines “revamp” as follows: remake, revise. I sure have a couple remakes under my belt in dealing with this company on a single project.

Josh Urrutia

Jul 8, 2024

•From Google
Backyard Fence, new railings for existing deck, and front porch railings replacement. Price agreed upon, contract signed, initial payment made and work was scheduled. First day fence was installed incorrectly to meet the front of the house instead of the back as planned. So naturally they ran out of material. Once it was discovered, they moved it but left a huge rut in my side yard. The Deck railings were completed except for the last 3 foot section at the bottom of the stairs because they once again ran out of material. No completion date communicated. That sat there for 3 months before they came back to complete it. Various members of the work crew would just show up randomly to complete different parts of the work and fix little items that were messed up with no advanced notice, but when I would call or email and try to get an update or new scheduled time...I would get no response. The workers that would show up to "fix" things would also act surprised when I would ask about the other issues as if it was brand new information. The front porch was not installed properly either, it was missing post feet, solar lights, and was uneven across the steps from rail to rail and just looked weird. When I told the installer it wasn't what I agreed to, he said it was the only way to do it "per code" So after a few months of calling and emailing, that was finally fixed as well. Work initially began in early March, was supposed to take less than a week...And here we are just finishing up the first week of June. The fence gate was also starting to sag and running together already so that was added to the list. The "fix" they did for the side yard didn't work so they also had to return to do that a second time. The materials used seem to be high quality and durable which is the only reason for getting any stars...but the communication about getting my job done, the organization, overall attention to detail, planning, and scheduling was all 0 stars. Good Products...Nice people....but just terrible customer service.

Susan Boda

Jul 8, 2024

•From Google
Exceptional customer experience with Kyle, the sales representative of ReVamp Fence in Appleton, Wisconsin. He was very knowledgeable and personable, and after showing us all of the fence styles, combinations, textures and numerous color samples, we were able to select the perfect fence to coordinate with our 1894 home. (Prior to calling ReVamp, my husband and I had checked with two of the big box stores to find a style to match our older home with no success.) He then measured our property and illustrated on paper how the install would look. We were very impressed with Kyle…his attention to detail, and his willingness to find the style of fence that we would like!! If you’re looking for something special, Kyle at ReVamp will definitely make it happen! Also, we want to applaud Paul, the field crew chief. It was a big installation job, and even though it was a rainy day and one of the hottest days in June 2024, he was courteous, professional and we can’t overstate how satisfied we were with his workmanship. We would definitely recommend ReVamp Fence of Appleton, Wisconsin!

Michelle Scott

May 9, 2024

•From Google
This company may do good work. But I never got the chance to experience that. I’m leaving a review because of the customer service process. I scheduled an appointment set for today for an estimate for my yard at 6pm and it was confirmed via text message. Only to receive a phone call the day of in the 4 o’clock hour with a lady telling me that Jason will be at my home around 5:30pm. I stated that I was in a little of traffic but I should be there shortly after 5:30pm. Pulled up at my home at exactly 5:40pm and no one was in sight. I contacted the lady who phoned me back informing her that I made it home and no one was waiting for me. The lady then states that Jason was here and he received some unwelcoming words from about 8 people telling him to get back in his car. Mind you no one lives in my home but my boyfriend and I. And we both were pulling up at home at the same time. We then ran back our cameras to see who did such a thing and there was absolutely no one in sight on the cameras but Jason. He rang the bell and then started texting the lady(I guess) because she stated that they were talking through text. Jason waited there a few minutes then walked away. I’m not saying he should never left. But my appointment was still set for 6pm. On top of that I just don’t understand why and how she came up with the excuse of he received some unwelcoming words from about 8 people. Will be contacting the BBB because I just don’t understand who would say such a thing. She informed me that she will tell Jason to call me so I could reschedule. And two hours later still no phone call from her or him. For this to be my first experience with Revamp Fence and Deck it was definitely a bad one because I’m still running back all my cameras from every angle and I don’t see anyone. So why would she say that when I had an schedule appointment?
Is this your business?

This business hasn't been claimed yet. Claim it to manage your listing.